|
Where we come to you!
Product Launch Support
When launching a new product, there never seems to be enough hours in
the day. When it comes down to crunch time, we can help you meet
critical timing deadlines to get your product on the market. We offer
several types of assistance to ensure all of your metrology needs are
met.
When you need a part program written for a new part, but are short on
staff to write the program, let us help you out. We can offer
assistance in writing PC-DMIS part programs. One of our many contract
services is writing these programs for you. All you need to do is let
us know what the critical measurements are and when you need the
program by and we will see to it that your program will be written, and
up and running to meet your deadlines.
If you have a PC – DMIS program written for a part, or series of parts,
but are short on staff to run them, or you just don’t have enough CMMs
or other metrology equipment to run the parts, turn to our precision
centers to help you out. We can offer assistance in inspecting your
parts whenever you are running low on resources. Not only do we have a
showroom full of Metrology equipment, but we also have a full staff of
applications engineers with many years of metrology experience. We can
get satisfy all of your measurement needs and we can even expedite your
orders if you are close to meeting your deadlines.
Hexagon Metrology has a fully capable staff that is ready and willing
to help you get your product to market to meet timing milestones that
will help your business thrive. We can do everything from REVERSE
ENGINEERING to program writing and inspecting. When you are looking for
a company to assist you in any type of measurement needs, look not
further than HEXAGON METROLOGY.
Additional Inspection Capacity for Times of Peak Demand
Lets face it, When it rains, it pours... In times of high volume jobs,
HEXAGON METROLOGY can be your umbrella. Not only can our qualified
staff write PC-DMIS part programs for you, we can do your inspection
work at our precision centers using our CMM machines. Our contract
services department is ready and waiting to assist you in any way
possible.
We can measure your small, fragile parts using our no-touch vision
inspection systems as well. With our vision line of equipment, you will
not have to worry about any chance of your parts getting damaged due to
a touch probe.
Our line of Vision products are designed to operate without the use of any tactile touch probes.
For your larger parts, we can use our wide range of CMM/s and our
portable metrology devices as well such as ROMER arms and LEICA
TRACKERS.
After the programming and measuring are completed, we also have a
variety of reporting options. We have several common reporting
templates set up and we even have control over the output of your
measurement data in that we can report it in the measurement units of
your choosing. So from beginning to end, Our Applications Engineers are
here with the goal of total customer satisfaction.
When your business is booming, and you do not want to turn away jobs,
give us a call and let us handle your overflow inspection work. We can
write the part programs as well as do the inspecting, sorting, and even
custom reporting.
Our Applications Engineers Have Expertise In Many Industries
Here at Hexagon Metrology, we pride ourselves on the experience and
know how when it comes to all of your metrology needs. Our Application
Engineer’s are cross trained on several different metrology solution
systems so they are knowledgeable on what the best solution is for your
particular parts. Our AEs have also worked in all aspects of the
quality control field, so the knowledge and understanding that they
possess will save your company valuable time and money.
When it comes to experience, our team is very diverse in what they have
measured. Along with in-house measuring contract inspection, we have
done several different long term onsite inspection jobs as well. We
have worked in a variety of settings, everywhere from a temperature
controlled clean room to a productive shop floor.
The Application Engineers at Hexagon Metrology have experience working
with all sorts of parts in industries ranging from furniture to
aerospace. We are comfortable and confident that we can assist you in
all of your metrology needs and you will be a satisfied customer.
Our Applications Team is Available To Deliver Customized Metrology Services and Customized Training at Your Facility
Advantages of this approach:
- We use your specifc makes and models of equipment
- We use your parts for training
- We use your software version for programming or training
Traning
- Our highly skilled Applications department can customize a training course specifically designed for your particular application, your parts, and your situation.
- Increase your productivity and shorten your payback period by learning how to effectively use CAD based CMM programming to efficiently and accurately measure your complex geometric parts.
- Our onsite training courses are designed with you in mind. 1-day to 5-day courses are available and can be completely customized for your parts, your people, and your needs.
Programming
- From the most simple stampings to the most complex gear or airfoil, we will provide accurate measurement solutions where others fail – and you can be certain we will succeed for you!
- Contract Hexagon Metrology Services to provide you with onsite programming support to streamline your complex part programs.
- Customized programming including logic, customized operator interfaces and other special features is available.
See how we can make your machine (and people) more efficient for you!
|
Service and Support 
